Unitech MS926 - Reread Delay

- 86 -
MS926 User’s Manual
4.6.9 No Read
With No Read turned On, the scan engine notifies you if a code cannot be read.
If using an EZConfig-Scanning Tool Scan Data Window, an “NR” appears
when a code cannot be read. If No Read is turned Off, the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message (see Data Formatting ). The hex code for
the No Read symbol is 9C.
Off*
On