Unitech MS926 - Page 128

- 114 -
MS926 User’s Manual
4.9 Data Validation
To define 1:1/1:N function, please enter,
1) Main Menu /Data & Memory/ Data Validation
2) Select "1:1 Checking" or "1:N Checking"
3) Select CHECKING START POSITION for Data 1 and Data 2
■ Data 1 is valid data
Start Position: 1--255
■ Data 2 is data to be checked with Data 1
Start Position: Any, 1--255
4) Select CHECKING LENGTH (All Characters, 1--255)
"All Characters" means from Data 1 start position to its end.