- 19 -
MS926 User’s Manual
Chapter 2 - Installation
2.1 NFC Pairing with Mobile Devices
1. Ensure your host device supports NFC and that it is enabled.
2. Touch the back of the MS926 scanner to your host device.
3. Your device is now paired with MS926.
2.2 BT HID
BT HID*
Establishing BT connection in BT HID mode.
1. Use MS926 to scan BT HID barcode.
2. Press Page Down key then press Scan button to enter BT pairing mode.
3. Double-click Bluetooth Device icon in the toolbar on your PC. Select
Add New Devices. When you see a device list windows, choose
MS926-XXXX and then press Next. PC now is establishing BT connection.
4. MS926 will beep when your PC successfully establish a BT connection with
MS926.
To Next Page
Loading...
