- 45 -
MS926 User’s Manual
3.3.11.3 UPC-E0 Addenda Separator
When this feature is On, there is a space between the data from the bar code
and the data from the addenda. When turned Off, there is no space.
Default = On.
On*
Off
3.3.11.4 UPC-E0 Check Digit
Check Digit specifies whether the check digit should be transmitted at the end
of the scanned data or not. Default = On.
On*
Off
3.3.11.5 UPC-E0 Leading Zero
This feature allows the transmission of a leading zero (0) at the beginning of
scanned data. To prevent transmission, scan Off. Default = On.
On*
Off
To Next Page
Loading...
