- 49 -
MS926 User’s Manual
3.3.13.5 EAN/JAN-13 Addenda Separator
When this feature is On, there is a space between the data from the bar code
and the data from the addenda. When turned Off, there is no space.
Default = On.
Note: If you want to enable or disable EAN13 with Extended Coupon Code, refer to
UPC-A/EAN-13 with Extended Coupon Code
.
On*
Off
3.3.14 EAN/JAN-8
EAN/JAN-8 On*
Default All EAN/JAN-8
Settings
EAN/JAN-8 Off
3.3.14.1 EAN/JAN-8 Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On.
On*
Off
To Next Page
Loading...
