All rights reserved 88 Service Manual e-Series (EN) 1.1.8
Lost package from Primary Teach Pendant
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from Secondary Teach Pendant
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from Primary Euromap67
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from Secondary Euromap67
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from Secondary Masterboard
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from joint 0
Serial communication problem with one or
more joints
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from joint 1
Serial communication problem with one or
more joints
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from joint 2
Serial communication problem with one or
more joints
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from joint 3
Serial communication problem with one or
more joints
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from joint 4
Serial communication problem with one or
more joints
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence
Lost package from joint 5
Serial communication problem with one or
more joints
If this happens often:
a) Verify that the communication cables are connected properly.
b) Do a Complete rebooting sequence