DS1093-520 42
Select the backup device (e.g. USB flash drive, eSATA disc or USB DVD) and the destination folder, press [OK] to start
the backup, a progress bar appears in the lower part of the window to monitor the backup completion state.
3.5.3.3 Back-up file based on event
In the image below, press [Search] to start searching from the video recordings available on the HDD by filters (Date, Start,
End, Channel, Type).
In the viewed, list select the files to be saved, then press the [Backup] button to open the window shown in the following
image, select the required video file and press [Save].
Press [Quick Backup] to save the video file stored on the hard disk.
Note: Video files can be saved in [H.264] format only for backing up to CD / DVD.
Select the backup device (e.g. USB flash drive, eSATA disc or USB DVD) and the destination folder, press [OK] to start
the backup, a progress bar appears in the lower part of the window to monitor the backup completion state.
To Next Page
Loading...
Need help?
General
