US Cutter LaserPoint - Troubleshooting Common Issues

- 46 -
Specifications
LaserPoint Release Date
October, 2007
Controller
16 bit CPU
Control Panel
2x8 LCD 13 button thin-film keyboard
Driver:
High stepping motor, micro-step driver
Maximum Paper Feed Width
28.74 inches (730mm) - 24 inch model
39.37 inches (1000mm) - 36 inch model
51.18 inches (1300mm) - 48 inch model
Maximum Cutting Width
25.20 inches (640mm) - 24 inch model
35.63 inches (905mm) - 36 inch model
47.64 inches (1210mm) - 48 inch model
Maximum Cutting Speed
15.75 inches (400mm) per second
Maximum Cutting Thickness
.039 inches (1mm)
Pressure Range
0 - 400g
Precision
.1mm
Plotting Pen
All 11.4mm diameter plotting pens
Communications Protocol
DM-PL HP/GL; automatic identification
Communications Interface
USB (Universal Serial Bus) and RS-232 Serial (9 pin
Input Power
110 VAC/ 220 VAC 50 Hz / 60 Hz (auto-switching)
Standard power cord included with unit is US-standard 110 VAC
grounded plug.
Power Consumption
Less than 100VA
Customer Service Line
425-481-3555; option #3. Available 8am - 5pm, Mon-Fri
Technical Support Line
425-481-3555; option #2 Available 9am - 4pm, Mon-Fri
Technical Support Website
support.uscutter.com
Customer Forums
forum.uscutter.com
Manufactured For and Sold
Directly By
19510 114
th
Avenue NE, Suite C-1
Woodinville, WA 98072
425-481-3555 phone
888-640-0720 fax
www.USCutter.com