43
Charge Cable Extension Pigtails
Part Number 630038
Provides easy splicing of charging device cable. Works with
AC Transformer and Solar Panel.
Monitored Entrapment Device
Expansion Module
Part Number 500015
The expansion module is designed to monitor for the
connection and proper operation of multiple monitored
external entrapment devices.
If the installation requires more than 1 monitored contact
edge or 1 monitored photo eye for open or close direction,
the expansion module must be installed.
Monitors up to 5 monitored contact edges (10K resistor)
and up to 4 monitored photo eyes (N/C contact - NO 10K)
for a total of 9 devices.
7 Day Timer (Solar friendly device)
Part Number 550015
The optional 7 day timer can be used to open the gate at a
preset time and if the auto close feature of the gate operator
is being used the gate can then close automatically at a
preset time. The timer is supplied with 3 spade terminals for
easy connection. Connect wires from timer to control board J2
connector as follows:
• J2 Pin 1 (+12vdc) connect to pin 1
• J2 Pin 2 (Gnd) connect to pin 2
• J2 Pin 9 (Normally Open) connect to pin 4
20 Watt Solar Panel
Part Number 520030
2 mounting brackets included
DC power plug for easy connection
To Next Page
Loading...
