USFilter STRANTROL SYSTEM 5 User Manual

Part III – Programming the System5
Page 13
4: Programming HRR Setup
If you choose HRR Setup from the Main Menu,
the Screen will display some or all of the
following choices (depending upon your system
needs).
Next to all of the choices but HRR Calibrate is
the current programmed value for that option.
Type in the number of the option you would like
to program.
The screen will display the previous value selected
and prompt you to enter the new value. Press
Enter.
4a: Entering New Values for HRR Setup
For each option you select from the HRR Setup
Menu the screen will display the previous value
selected for that option and prompt you to enter
the new value. The following table will help you
decide what values to enter.

USFilter STRANTROL SYSTEM 5 Specifications

General

Brand	USFilter
Model	STRANTROL SYSTEM 5
Category	Controller
Language	English