Introduction
Page 1
Introduction
What’s Included
Your shipping package should contain these
items:
•
The Strantrol System5 Controller with Data
Modem and Warranty Registration Form
•
HRR Sensor (Part No. 7042003)
•
pH Sensor (Part No. 7040002)
•
Temperature Sensor (Part No. 7047001)
•
Flowcell, Flowcell fittings and Poly Tubing
•
Replacement Parts Order Form (included in
back of this manual)
CAUTION: Handle the HRR, pH and
Temperature sensors carefully! They will break
if dropped on a hard surface. The tips must be
kept wet at all times, so leave the sensor
shipping cap in place until you are ready to
install.
General Guidelines
How you choose to install and use your
Strantrol
®
Controller depends in part on your
needs and specific applications. This manual
offers a general guideline that is suitable for the
majority of users. As an overview, we suggest that
you first mount the components, i.e., the
Controller, Flowcell, HRR sensor, pH sensor and
Temperature sensor. Then plumb the sample
stream, open valves and test for leaks. Finally,
wire everything properly and program the
controller. The System5 contains four relays that
may be configured for pH Control (acid/base),
Chlorine/Bromine Control, Sensor Wash,
Temperature Control, Alarm, Booster Pump,
Superchlor, and Dechlor/Ozone. The System5
also has optional 4-20mA Recorder outputs.
To Next Page
Loading...