5-2
Operation on the Machine > Loading Originals
Loading Originals
Placing Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
When you place envelopes or cardstock on the platen
For details on Original Orientation, refer to Original Orientation on page 6-15.
For the procedure for feeding envelopes or cardstock, refer to When you load envelopes or cardstock in the multi
purpose tray on page 3-25.
Do not leave the platen cover or the optional document processor open as there is a danger of personal
injury.
Do not push the platen cover or the optional document processor forcefully when you close it. Excessive
pressure may crack the platen glass.
When placing books or magazines on the machine, do so with the platen cover or the optional document
processor in the open position.
Align it flush against
the original size
indicator plates with
the back left corner
as the reference
point.
Put the scanning
side facedown.
Align it flush against
the original size
indicator plates with
the back left corner
as the reference
point.
Put the scanning
side facedown.
To Next Page
Loading...
Need help?
General
