Utax 3060i3560i - Changing Device Information

2-42
Installing and Setting up the Machine > Embedded Web Server RX
Changing Device Information
Change the device information of the machine.
1
Display the screen.
1 Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on
page 2-40.
2 From the [Device Settings] menu, select [System].
2
Specify the host name.
Enter the device information, and then click [Submit].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
To restart the network interface card, click [Reset] in the [Management Settings]
menu, and then click [Restart Network] in “Restart”.
3
2
1