Utax 3060i3560i - Functions Available on the Machine; Copy

6-2
Using Various Functions > Functions Available on the Machine
Functions Available on the Machine
Copy
To configure the settings for functions, select the tab and press the function key.
For details on each function, see the table below.
Tab Function key Description
Reference
page
Configure the settings
for originals, paper,
and finishing such as
collate and staple.
Original Size Specify the original size to be scanned. page 6-11
Paper Selection Select the cassette or multi-purpose tray that contains
the required paper size.
page 6-12
Mixed Size Originals Scans all sheets in the document processor, even if
they are of different sizes.
page 6-13
Original Orientation Select the orientation of the original document top
edge to scan correct direction.
page 6-15
Collate/Offset Offsets the output by page or set. page 6-16
Staple/Punch Staples or punches printed documents. page 6-17
Paper Output Specify the output tray. page 6-20
Configure the settings
for density, quality of
copies, and color
balance.
Density Adjust density using 7 or 13 levels. page 6-20
Original Image Select original image type for best results. page 6-21
EcoPrint EcoPrint saves toner when printing. page 6-22
Sharpness Adjusts the sharpness of image outlines. page 6-23
Background Density
Adj.
Removes dark background from originals, such as
newspapers.
page 6-23
Prevent Bleed-thru Hides background colors and image bleed-through
when scanning thin original.
page 6-24
Original
Size
Paper
Selection
Mixed Size
Originals
Original
Orientation
Collate/
Offset
Staple
/Punch
Paper Output
Quick Setup Advanced
Setup
Program
Preview
100%
A4
A4Original
Zoom
:
:
:
Send
Preview
Org./Paper/
Finishing
Layout/Edit
㪠㫄㪸㪾㪼㩷㪨㫌㪸㫃㫀㫋㫐
Tab
Function key
Org./Paper/
Finishing
Image Quality