8-24
System Menu > Default Setting on the Machine (System Menu)
Manual Staple
Offset Documents by Job
Low Toner Alert Level
Common Settings Manual Staple
Only displayed when the optional 3,000-Sheet Finisher is installed.
Item Description
Manual Staple Select whether to use Manual Staple.
Value: Off, On
If you selected [On], set the time until manual stapling mode is automatically cancelled. The
setting range is 5 to 60 seconds (in 5-second increments).
Staple Position Set the default Staple Position.
Value: A4 Long Edge, Letter Long Edge
Common Settings Offset Documents by Job
Item Description
Offset Documents by Job Select whether to offset documents by Job.
Value: Off, On
This function is displayed when an optional 1,000-Sheet Finisher or 3,000-Sheet Finisher is
installed.
Common Settings Low Toner Alert Level
Item Description
Low Toner Alert Level Set the amount of remaining toner to alert low toner.
Value: Off, On
Selecting [Off] alerts you low toner when the amount of remaining toner becomes 5%.
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in
1% increments).
To Next Page
Loading...
