8-54
System Menu > Default Setting on the Machine (System Menu)
User Property
Allows you to view information about logged in users and edit some of that information.
User Login (page 9-4)
Date/Timer/Energy Saver
Configure settings related to the date and time.
User Property
Date/Timer/Energy Saver
Item Description
Date/Time Set the date and time for the location where you use the machine. If you perform Send as E-
mail, the date and time set here will be displayed on the header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to
59), Second (00 to 59)
If you change the date/time while using the trial version of an application, you will no longer be
able to use the application.
Date Format Select the display format of year, month, and date. The year is displayed in Western notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
Time Zone Set the time difference from GMT. Choose the nearest listed location from the list. If you select
a region that utilizes summer time, configure settings for summer time.
Setting Date and Time (page 2-26)
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
The time allowed to elapse before the panel is reset is set with the Panel Reset Timer on page
8-55.
Auto Error Clear If an error occurs during processing, processing stops to wait for the next step to be taken by
the user. In the Auto Error Clear mode, automatically clear the error after a set amount of time
elapses. For details, refer to Responding to Messages on page 10-20
.
Value: Off, On
Low Power Timer Set amount of time before entering the Low Power mode.
Value:
For Europe
3060i: 1 to 60 minutes (1minute increments)
3560i: 1 to 120 minutes (1minute increments)
Except for Europe
1 to 240 minutes (1minute increments)
Low Power Mode and Auto Low Power Mode (page 2-31)
To Next Page
Loading...
Need help?
General
