6-49
Using Various Functions > Functions
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job. Originals will be scanned
continuously until you press [Finish Scan].
Select [On] to use continuous scanning. To use Job Build, select [Job Build]. You can set the functions that appear on
the screen during scanning.
Job Build
When [Job Build] is selected when copying or printing, the binding orientation for finished documents can be selected
from [Binding Left], [Binding Right] or [Binding Top].
The following functions can be selected during scanning.
Item Description
Next Copy: On Back In duplex copying, prints on the back side if the next page is to be printed on the front side. Press [Next
Copy: On Back] to use this function.
Next Copy: On Front In duplex copying, prints on the front side if the next page is to be printed on the back side. Press [Next
Copy: On Front] to use this function.
Sheet Insertion Inserts a blank paper in the next page. Press [Sheet Insertion] to use this function.
To Next Page
Loading...
Need help?
General
