3-14
Basic Operation
If you select [2-sided>>2-sided], press [Detail] (the Right
Select key) and you can select the binding edge of the
original.
After pressing the OK key, select the binding edge of the
finished copies.
After pressing the OK key, select the original setting
orientation.
5 Press the OK key. Completed. is displayed and the
screen returns to the basic screen.
6 Press the Start key. Copying begins.
If the original is placed on the platen, replace it with the
next one before pressing the Start key.
If there is no next original, press [End Scan] (the Right
Select key). Copying begins.
To Next Page
Loading...
Need help?
General
