Utax 5240L

4
4-7
Copying Functions
Use the procedure below to select the orientation when placing the originals on the platen.
1 Press the Copy key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [Orig.Orientation].
5 Press the OK key. Orig.Orientation appears.
6 Press the U or V key to select [Top Edge Top] or [Top
Edge Left].
7 Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for copying.
8 Press the Start key to start copying.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Function Menu: a b
*********************
2 Collate T
3
Duplex T
[ Exit ]
1 Paper Selection T
Orig.Orientation: a b
1 c Top Edge Top
*********************
2 * d Top Edge Left