6
6-11
Document Box
set maximum are stored, the oldest job will be overwritten each time a new job is stored. When the machine power
is turned off, jobs stored in this mode are erased. For the number of documents that can be stored in Quick Copy
mode, see Quick Copy Jobs on page 8-88.
1 Press the Document Box key. The Document Box menu
appears.
2 Press the U or V key to select [Job Box].
3 Press the OK key. The Job Box menu appears.
4 Press the U or V key to select [Quick Copy].
5 Press the OK key. The user selection menu appears.
6 Press the U or V key to select the user.
7 Press the OK key. The print file selection menu appears.
8 Press the U or V key to select the file to be printed, and
then press [Select] (the Right Select key). The selected
file will be marked.
If you need to add another file, repeat this procedure to
select the file.
NOTE: To select all files, press Menu (the Left Select key)
and select [Select All]. To deselect all files, select [Clear All].
To show file details, select [Detail].
To Next Page
Loading...
Need help?
General
