Utax 5240L

8-58
Default Setting (System Menu)
4 Press the OK key. The Function Default menu appears.
5 Press the U or V key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu appears.
7 Press the U or V key to select [2 in 1 Layout].
8 Press the OK key. 2 in 1 Layout appears.
9 Press the U or V key to select [g L to R f T to B] or
[e R to L].
10 Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
4 in 1 Layout
Select the default value for layout when [4 in 1] is selected for Combine. Items available for the default value are as
follows:
Use the procedure below to select the default value for layout.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Detail Setting: a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]
1 2 in 1 layout
2 in 1 Layout a b
*********************
2 e R to L
1 * g L to R f T to B
Item Description
h Right then Down Arranges from upper left to right.
i Down then Right Arranges from upper left to bottom.
j Left then Down Arranges from upper right to left.
k Down then Left Arranges from upper right to bottom.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings