Utax 5240L

8
8-61
Default Setting (System Menu)
8 Press the OK key. Border Line appears.
9 Press the U or V key to select [ None], [l Solid Line],
[m Dotted Line] or [n Positioning Mark].
10 Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
Orig. Binding
Select the default value for the binding edge of the original when [2-sided>>1-sided] or [2-sided>>2-sided] is selected
for Duplex. Items available for the default value are as follows:
Use the procedure below to select the default value for the binding edge of the original.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the U or V key to select [Detail Setting].
Border Line: a b
*********************
2 l Solid Line
3 m Dotted Line
1 * None
Item Description
o Left/Right Left/right binding
p Top Top binding
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection