8
8-117
Default Setting (System Menu)
Editing One-touch Key
Edit/delete the destinations you added to One-touch Key.
Use the procedure below to edit the one-touch key.
1 In the Send or FAX screen, press the one-touch key
where you want to edit the destination and hold it (2
seconds or longer). Select Key Set. appears.
The screen shown is the one when No.1/No.12 is
pressed and held.
2 Press the U or V key to select the key number where
you want to edit the destination.
3 Press the OK key. The Key Edit appears.
4 Press the U or V key to select [Edit].
NOTE: If you select [Delete] here and press the OK key,
you can delete the registration of the destination. If you
press [Yes] (the Left Select key) in the screen that appears,
Completed. is displayed and the registration of the
destination is deleted.
5 Press the OK key. The Address Book list screen
appears.
6 Press the U or V key to select the destination you want
to newly register.
NOTE: If you want to search from the Address Book, refer
to Search in Address Book on page 3-27.
7 Press the OK key. A confirmation screen appears.
To Next Page
Loading...
