Utax 5240L User Manual

11
11-11
Management
3 In the delete confirmation screen, press [Yes] (the Left
Select key). The user is deleted and the screen returns
to Local User List.
Enabling/Disabling Group Authentication
This enables group authentication using the LDAP server. This menu can be used only when [Netwk Authentic.] is
selected as the user authentication method. For details of LDAP server settings, refer to the Operation Guide of the
LDAP server.
Use the procedure below to enable group authentication.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the U or V key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
3 The User/Job Account menu appears.
4 Press the U or V key to select [User Login Set.].
5 Press the OK key. The User Login Set. menu appears.
6 Press the U or V key to select [Group Auth.].
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.
User Login Set.: a b
*********************
2 Local User List
3 Group Auth.
[ Exit ]
1 User Login

Utax 5240L Specifications

General

Brand	Utax
Model	5240L
Category	All in One Printer
Language	English