Basic Operation
3-22 OPERATION GUIDE
6 If there are additional destinations, press the Add
Destination key. Repeat steps 2 to 5 to enter
additional destinations. Up to 100 destinations can
be specified.
7 Press the Confirm Destination key to confirm the
registered destinations.
Press the U or V key to select a destination and
press the OK key. Then, you can edit or delete the
destination.
Press [Exit] (the Right Select key) to return to the
basic screen.
8 Press the Start key. Transmission starts.
NOTE: If the screen for confirming the destination
before transmission (page 8-64) is set to [On], the
Confirm Destination screen appears when the Start
key is pressed. For more information, refer to Confirm
Destination Screen on page 3-27.
Dest. Confirm.:
a
b
*********************
p
aaaaaaaaa@
N
p
bbbbbbbbb@
N
[ Exit ]
To Next Page
Loading...