Default Setting (System Menu)
8-140 OPERATION GUIDE
2 The System menu appears.
3 Press the U or V key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the U or V key to select [IPP Security].
8 Press the OK key. IPP Security appears.
9 Press the U or V key to select [IPP/IPP over SSL]
or [IPPoverSSL only].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
HTTP Security
Specify the protocol to be used for HTTP. The default setting is HTTPS only.
Use the procedure below to make the setting.
System:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
Network Setting:
a
b
*********************
8
Host Name
9
LAN Interface
[ Exit ]
Secure Protocol:
a
b
1
SSL
*********************
3
HTTP Security
[ Exit ]
IPP Security:
a
b
1
IPP/IPP over SSL
*********************
To Next Page
Loading...
Need help?
General
