Sending Functions
5-10 OPERATION GUIDE
File Format
Select the file format of the image to send.
The table below lists the file formats and their details.
NOTE: You cannot select [JPEG] if [Black and White] is selected for the color mode.
Use the procedure below to select the file format for transmission.
1 Press the Send key.
2 Place the originals on the platen.
3 Press the Function Menu key. Function Menu
appears.
4 Press the U or V key to select [File Format].
5 Press the OK key. File Format appears.
6 Press the U or V key to select the file format from
[PDF], [TIFF], [XPS] or [JPEG].
If Full Color or Grayscale has been selected for the
color mode for scanning, press [Detail] (the Right
Select key) and select the image quality.
File Format
Adjustable range of image
quality
Color mode
PDF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Full Color, Grayscale, Black
and White
TIFF 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Full Color, Grayscale, Black
and White
XPS 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Full Color, Grayscale
JPEG 1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
Full Color, Grayscale
Function Menu:
a
b
*********************
2
Original Size
T
3
Original Image
T
[ Exit ]
File Format:
a
b
*********************
2
TIFF
3
XPS
[ Detail ]
To Next Page
Loading...
Need help?
General
