Preparation before Use
2-22 OPERATION GUIDE
11
Press the OK key. The IPv4 Setting menu appears.
12
Press the U or V key to select [Bonjour].
13
Press the OK key. Bonjour appears.
14
Press the U or V key to select [On] or [Off] and
then press the OK key.
Completed. is displayed and the screen returns to
the IPv4 Setting menu.
AppleTalk Setup
Select the Apple Talk network connection. The default setting is On.
Use the procedure below to setup the AppleTalk setting.
1 Press the System Menu/Counter key on the main
unit operation panel.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in.
NOTE:
• Refer to Character Entry Method on Appendix-5 for
details on entering characters.
• If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
IPv4 Setting:
a
b
1
DHCP
*********************
3
IP Address
[ Exit ]
Bonjour:
a
b
*********************
2
On
Login User Name:
L
b
********************
Login Password:
[ Menu ] [ Login ]
To Next Page
Loading...
Need help?
General
