Preparation before Use
OPERATION GUIDE 2-23
2
2 In the Sys. Menu/Count. menu, press the U or V
key to select [System], and then press the OK key.
IMPORTANT: To make the settings, you must have
logged in using a user ID with administrator privileges.
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3 In the System menu, press the U or V key to select
[Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [AppleTalk].
6 Press the OK key. AppleTalk appears.
7 Press the U or V key to select [On] or [Off] and
then press the OK key.
Completed. is displayed and the screen returns to
the Network Setting menu.
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
Administrator only.
System:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
Network Setting:
a
b
*********************
2
NetWare
3
AppleTalk
[ Exit ]
AppleTalk
a
b
1
Off
*********************
To Next Page
Loading...
Need help?
General
