Sending Functions
OPERATION GUIDE 5-19
5
WSD Scan
WSD Scan saves images of originals scanned on this machine as files on a WSD-compatible computer.
NOTE: For information on operating the computer, refer to the operating system help for your computer.
To use WSD Scan, WSD Scan Setup (page 8-132) must be set to [On] in the network settings.
Procedure using computer
1 Install the WIA driver on your computer in the
custom mode from the supplied CD-ROM (Product
Library).
NOTE: For details of installation for WIA driver, refer to
Setup Guide.
2 Select Start button of the Windows display, and
then Network.
3 Select the machine displayed Multifunctional
Devices, and then right-click Install.
Installing of the driver starts.
4 After installing the driver, click Close.
Procedure using this machine
1 Press the Send key.
2 Place the originals in the document processor or on
the platen.
Displays the screen for sending.
NOTE: Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the screen for sending.
3 Press the U or V key to select [WSD Scan].
Send to:
a
b
2
G
Folder(SMB)
3
H
Folder(FTP)
*********************
To Next Page
Loading...
Need help?
General
