Utax CD 1028 - Setting the Destination

Status / Job Cancel
7-14 OPERATION GUIDE
4 Press the U or V key to select [Job Log History].
5 Press the OK key. The Job Log History menu
appears.
Setting the destination
Set the destination to which job log histories are sent.
Use the procedure below to set the destination.
1 In the Job Log History menu, press the U or V key
to select [Destination].
2 Press the OK key. The Destination menu appears.
Confirming Current Destination
1 In the Destination menu, press the U or V key to
select [Confirmation].
Report: a b
2 Admin Rpt Set.
3 Result Rpt Set.
*********************
[ Exit ]
Job Log History:
a b
*********************
2 Send History
3 Destination
[ Exit ]
Job Log History:
a b
1 Auto Sending
2 Send History
*********************
[ Exit ]
Destination:
a b
*********************
2 Register
[ Exit ]
Destination:
a b
*********************
2 Register
[ Exit ]