Basic Operation
OPERATION GUIDE 3-33
3
Program (Copying and Sending)
Settings of various functions frequently used for copying and sending can be collectively registered as a
program. Then, you can change the current settings of various functions to the registered settings by just
pressing one of the Program 1 to 4 keys.
Registering Settings
After making settings, press and hold the one of the
Program 1 to 4 keys where you want to register the
settings for 3 seconds. The current settings are
registered to the selected program key.
Changing and Deleting Settings
1 Press and hold the one of the Program 1 to 4 keys
where the settings you want to change/delete are
registered for 3 seconds. Menu appears.
2 To replace the registered settings with the current
settings, press the U or V key to select [Overwrite]
and then press the OK key. A confirmation screen
appears. Press [Yes] (the Left Select key) to
change the settings.
To delete the registered settings, press the U or V
key to select [Delete] and then press the OK key. A
confirmation screen appears. Press [Yes] (the Left
Select key) to delete the registered settings.
Recalling Settings
Press the one of the Program 1 to 4 keys where the settings you want to recall are registered. The current
settings of various functions are replaced with the registered settings.
Registered.
z
Program 1
Menu:
a
b
*********************
2
Delete
Overwrite.
Are you sure?
z
Program 1
[ Yes ] [ No ]
Delete.
Are you sure?
z
Program 1
[ Yes ] [ No ]
To Next Page
Loading...