Preparation before Use
OPERATION GUIDE 2-25
2
Embedded Web Server (Settings for E-mail)
The Embedded Web Server is a tool used for tasks such as verifying the operating status of the machine and changing
the settings for security, network printing, E-mail transmission and advanced networking.
NOTE: Here, information on the FAX settings has been omitted. For more information on using the FAX, refer
to the Fax Kit Operation Guide.
FAX functions available only in CD 1128.
The procedure for accessing the Embedded Web Server is explained below.
1 Launch your Web browser.
2 In the Address or Location bar, enter the machine’s IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and the Embedded Web Server as well as their
current status.
3 Select a category from the navigation bar on the left of the screen. The values for each category must be
set separately.
If restrictions have been set for Embedded Web Server, enter th
e correct password to access pages other
than the startu
p page. The default setting is admin00. The password can be changed.
For details, refer to the Embedded Web Server Operation Guide.
To Next Page
Loading...
Need help?
General
