Utax CD 1028 - Page 54

Preparation before Use
OPERATION GUIDE 2-21
2
3 In the System menu, press the U or V key to select
[Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [TCP/IP Settings].
6 Press the OK key. The TCP/IP Settings menu
appears.
7 Press the U or V key to select [TCP/IP].
8 Press the OK key. TCP/IP appears.
9 Press the U or V key to select [On] and then press
the OK key.
Completed. is displayed and the screen returns to
the TCP/IP Settings menu.
10 Press the U or V key to select [IPv4 Setting].
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
Network Setting:
a b
*********************
2 NetWare
3 AppleTalk
[ Exit ]
TCP/IP Settings:
a b
*********************
2 IPv4 Setting
3 IPv6 Setting
[ Exit ]
TCP/IP:
a b
*********************
2 *On
TCP/IP Settings:
a b
1 TCP/IP
*********************
3 IPv6 Setting
[ Exit ]