Utax CD 1028 - Page 219

Default Setting (System Menu)
8-34 OPERATION GUIDE
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Scan Resolution].
6 Press the OK key. Scan Resolution appears.
7 Press the U or V key to select [200x100dpi
Norm.], [200x200dpi Fine], [200x400dpi S.Fin],
[300x300dpi], [400x400dpi U.Fin] or [600x600dpi].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Color Selection
Select the default color mode setting. The available default settings are shown below.
Use the procedure below to select the default color mode setting.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
Scan Resolution:
a b
*********************
2 200x200dpi Fine
3 200x400dpi S.Fin
Color mode Description
Full Color Scan document in full color.
Grayscale Scan document in grayscale for smoother
and finer finish.
Black & White Scan document in black and white.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]