Utax CD 1028 - Page 227

Default Setting (System Menu)
8-42 OPERATION GUIDE
Collate
Set the defaults for Collate. The table below shows the available settings.
NOTE: Refer to page 3-17 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Collate].
6 Press the OK key. Collate appears.
7 Press the U or V key to select [Off] or [On].
Item Description
Collate Off Collate not performed.
On Collate performed.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
Common Settings:
a b
*********************
2 Default Screen
3 Sound
[ Exit ]
Function Default:
a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
Collate:
a b
1 Off
*********************