Utax CD 1028 - Page 235

Default Setting (System Menu)
8-50 OPERATION GUIDE
Finish Binding
Select the default value for the binding edge of the finished copies when [1-sided>>2-sided] or [2-sided>>2-
sided] is selected for Duplex. Items available for the default value are as follows:
Use the procedure below to select the default value for the binding edge of the finished copies.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Detail Setting].
6 Press the OK key. The Detail Setting menu
appears.
7 Press the U or V key to select [Finish Binding].
Item Description
o Left/Right Left/right binding
p Top Top binding
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
Common Settings:
a b
*********************
2 Default Screen
3 Sound
[ Exit ]
Function Default:
a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
Detail Setting:
a b
*********************
2 4 in 1 Layout
3 Border Line
[ Exit ]