Utax CD 1028 - Page 282

Default Setting (System Menu)
OPERATION GUIDE 8-97
8
Time Zone
Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Date Setting], and
press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the user ID and password to log in, and
press [Login] (the Right Select key).
4 The Date Settings menu appears.
5 Press the U or V key to select [Time Zone].
6 Press the OK key. Time Zone appears.
7 Press the U or V key to select your location.
Sys. Menu/Count.: a b
4 User/Job Account
5 User Property
*********************
[ Exit ]
Common Settings:
a b
*********************
2 Default Screen
3 Sound
[ Exit ]
Login User Name:
L b
*******************
Login Password:
[ Menu ] [ Login ]
Date Setting: a b
*********************
2 Date Format
3 Time Zone
[ Exit ]
Time Zone:
a b
*********************
2 -11:00 Midway
3 -10:00 Hawaii