Maintenance
OPERATION GUIDE 9-3
9
2 Lift the developer unit together with the toner
container out of the machine.
3 Remove the drum unit from the machine by holding
the green levers with both hands.
NOTE: The drum unit is sensitive to light. Never
expose the drum unit to light for more than five
minutes.
4 Place the drum unit flat on a clean, level surface.
IMPORTANT: Do not place the drum unit on end.
5 Use a clean, lint free cloth to clean dust and dirt
away from the metal registration roller.
IMPORTANT: Take care not to touch the transfer roller
(black) during cleaning.
To Next Page
Loading...
Need help?
General
