Preparation before Use
OPERATION GUIDE 2-13
2
IMPORTANT: To make the settings, you must have
logged in using a user ID with administrator privileges.
The default settings of the login user name and login
password are both 2800.
If you have logged in using a user ID without
administrator privileges, the screen will display
Administrator only. and return to the standby screen.
3 In the System menu, press the U or V key to select
[Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the U or V key to select [TCP/IP Settings].
6 Press the OK key. The TCP/IP Settings menu
appears.
7 Press the U or V key to select [TCP/IP].
8 Press the OK key. TCP/IP appears.
Administrator only.
System:
a
b
*********************
2
I/F Block Set.
3
Security Level
[ Exit ]
Network Setting:
a
b
*********************
2
NetWare
3
AppleTalk
[ Exit ]
TCP/IP Settings:
a
b
*********************
2
IPv4 Setting
3
IPv6 Setting
[ Exit ]
TCP/IP:
a
b
1
Off
*********************
To Next Page
Loading...
Need help?
General
