4-16
Copying Functions
File Name Entry
Names a copy job. Add other information such as date and time or job number as necessary. You can check a job
history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.
1 Press the Copy key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [File Name Entry].
5 Press the OK key. File Name Entry appears.
6 Enter the file name, press the OK key. Additional Info.
appears.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
7 Enter the date, job number, etc. on the screen, and then
press the OK key.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
Completed. is displayed and the screen returns to the
basic screen for copying.
8 Press the Start key to start copying.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
To Next Page
Loading...
Need help?
General
