Utax CD 5235 - Managing Accounts

11-18
Management
Managing Accounts
This section explains how to add a new account. The following entries are required.
Use the procedure below to register a new account.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the U or V key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
3 The User/Job Account menu appears.
4 Press the U or V key to select [Job Account. Set.].
Item Description
Account Name Enter the account name (up to 32 characters).
Account ID Enter the account ID as many as eight digits
(between 0 and 99999999).
Restriction This Prohibits printing/scanning or restricts the
number of sheets to load. Refer to Restricting the
Use of the Machine on page 11-23.
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
1 User Login Set.
*********************
3 Unknown ID Job
[ Exit ]
2 Job Account.Set.