Utax CD 5235 User Manual

8-128
Default Setting (System Menu)
6 Press the OK key. NetWare appears.
7 Press the U or V key to select [On] or [Off].
If you select [On] and press the OK key, Frame Type
appears. Press the U or V key to select the desired
frame type.
The available frame types are as follows:
Auto
802.3
Ether-II
802.2
SNAP
8 Press the OK key. Completed. is displayed and the
screen returns to the Network Setting menu.
For detailed information on restarting the system, refer to
Restarting the System on page 8-115.
AppleTalk Setup
Select the Apple Talk network connection. The default setting is On.
Use the procedure below to setup the AppleTalk setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
NetWare: a b
1 Off
*********************
2 *On
Frame Type: a b
*********************
2 802.3
3 Ether-II
1 *Auto
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting

Utax CD 5235 Specifications

General

Brand	Utax
Model	CD 5235
Category	All in One Printer
Language	English