Appendix-14
Packaging: Choose paper that is properly packaged and stacked in boxes. Ideally, the packaging itself should have
been treated with a coating to inhibit moisture.
Specially treated paper: We do not recommend printing onto the following types of paper, even if it conforms to the
basic specifications. When you use these kinds of paper, purchase a small amount first as a sample to test.
• Glossy paper
• Watermarked paper
• Paper with an uneven surface
• Perforated paper
Special Paper
This section describes printing onto special paper and print media.
The following paper and media can be used.
• Transparency (OHP film)
• Rough
• Vellum
• Labels
• Recycled
•Preprinted
•Bond
• Cardstock
• Color (Colour)
• Prepunched
• Letterhead
• Envelope
•Thick
• High Quality
• Custom 1 to 8
When using these paper and media, choose that are designed specifically for copiers or page printers (such as laser
printers). Use the multi purpose tray for transparencies, thick paper, vellum, envelopes, cardstocks, and label paper.
Choosing Special Paper
Although special paper that meets the following requirements can be used with the machine, print quality will vary
considerably due to differences in the construction and quality of special paper. Thus, special paper is more likely
than regular paper to cause printing problems. Before purchasing special paper in volume, try testing a sample to
ensure the print quality is satisfactory. General precautions when printing onto special paper are given below. Note
that we are not responsible for any harm to the user or damage to the machine caused by moisture or specifications
of special paper.
Select a cassette or multi purpose tray for special paper.
To Next Page
Loading...
Need help?
General
