Utax CD 5235 User Manual

8-38
Default Setting (System Menu)
Sleep Timer
The time until the machine enters sleep mode can be set. Options are between 1 and 240 minutes (every one minute).
Use the procedure below to set the Sleep Timer. The default setting is 1 minute.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Timer Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the U or V key to select [Sleep Timer].
6 Press the OK key. Sleep Timer appears.
7 Press the U or V key to set the Sleep Timer. Set the
amount of time before entering the sleep state in
minutes. You cannot use the numeric keys to enter this
value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 Sleep Timer
3 PanelReset Timer
[ Exit ]
1 Err. Clear Timer
Sleep Timer: M b
(1 - 240)
*******1* min.

Utax CD 5235 Specifications

General

Brand	Utax
Model	CD 5235
Category	All in One Printer
Language	English