8
8-63
Default Setting (System Menu)
6 Press the OK key. The Detail Setting menu appears.
7 Press the U or V key to select [Orig. Binding].
8 Press the OK key. Orig. Binding appears.
9 Press the U or V key to select [o Left/Right] or
[ p Top].
10 Press the OK key. Completed. is displayed and the
screen returns to the Detail Setting menu.
Finish Binding
Select the default value for the binding edge of the finished copies when [1-sided>>2-sided] or [2-sided>>2-sided] is
selected for Duplex. Items available for the default value are as follows:
Use the procedure below to select the default value for the binding edge of the finished copies.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Function Default].
To Next Page
Loading...
