Utax CD 5235 User Manual

8-118
Default Setting (System Menu)
3 Press the U or V key to select [Network Setting].
4 Press the OK key. The Network Setting menu appears.
5 Press the U or V key to select [TCP/IP Settings].
6 Press the OK key. The TCP/IP Settings menu appears.
7 Press the U or V key to select [TCP/IP].
8 Press the OK key. TCP/IP appears.
9 Press the U or V key to select [On] and then press the
OK key.
Completed. is displayed and the screen returns to the
TCP/IP Settings menu.
10 Press the U or V key to select [IPv4 Setting].
11 Press the OK key. The IPv4 Setting menu appears.
12 Press the U or V key to select [DHCP].
Network Setting: a b
*********************
2 NetWare
3 AppleTalk
[ Exit ]
1 TCP/IP Settings
TCP/IP Settings: a b
*********************
2 IPv4 Setting
3 IPv6 Setting
[ Exit ]
1 TCP/IP
TCP/IP: a b
1 Off
*********************
2 *On
TCP/IP Settings: a b
1 TCP/IP
*********************
3 IPv6 Setting
[ Exit ]
2 IPv4 Setting
IPv4 Setting: a b
*********************
2 Bonjour
3 IP Address
[ Exit ]
1 DHCP

Utax CD 5235 Specifications

General

Brand	Utax
Model	CD 5235
Category	All in One Printer
Language	English