Preparation before Use
2-16
4 Click Install software.
The software install wizard starts up.
From this point, the procedure differs depending on your version of Windows and your connection method.
Proceed to the correct procedure for your connection type.
• Express Mode
• Custom Mode
Express Mode
In Express Mode, the installer automatically detects the printer when it is turned on. Use Express Mode for standard
connection methods.
NOTE: The TWAIN driver is automatically installed on your computer in this mode.
1 In the installation method selection window, select Express Mode. The print system detection window appears
and the installer detects the connected printers. If the installer does not detect a print system, check that the print
system is connected via USB or a network and that it is turned on. Then click Refresh to search print system
again.
NOTE: While the information shown in Windows Vista and Windows 7/Windows XP installation dialog boxes differs
slightly, the installation procedure is the same.
To Next Page
Loading...
Need help?
General
