5-25
Operation on the Machine > Sending
3
Accept the destination, and press [OK].
Destinations can be changed later. Refer to Checking and Editing Destinations on page 5-30.
Entering an E-mail Address
Enter the desired E-mail address.
1
In the basic screen for sending, press [E-mail].
2
Enter destination E-mail address.
Up to 128 characters can be entered.
To enter multiple destinations, press [Next Destination] and enter the next destination. Up to
100 E-mail addresses can be specified.
You can register the entered email address in the Address Book by pressing [Menu] and then
[Add to Address Book]. You can also replace the information for a previously registered
destination.
To send an E-mail, configure the environment settings necessary. For details, refer to E-mail Settings on page 2-41.
Character Entry Method (page 11-12)