Utax P-4530DN Service Manual

2 December 2012
2-4-9 Setting-range change of X9: 0 and 1 are changed into 0
and 2.
2-4-11 to 14 Addition of the connector of YC9 (110V only) :2-4-11, 13
Correction of header (the model number) : 2-4-11 to 14
3 15 February 2013
Contents Correction of page
2-4 Appendix
1-4-23 Notes addition (F code)
1-4-11 to 20 F code addition
Address Changed the address of souse africa
4 12 September 2013
Contents
2-4-11
2-4-1 (4) Maintenance command addition
1-3-6
1-3-22, 23
Added the comments:
(25) of Service status page and (9)Count/(11)-(h) of
Event log
2-4-4 Change of Setting value and Factory setting for N5
2-4-6 Correction of Factory setting for S7
5 26 December 2013
1-1-2 Added the comments: First print
2-2-7, 2-2-8 Correction: change of the No.2 and No.3 and change of
the parts name
6 31 March 2014
2-4-13 to 20 Correction: The conditions of USBLOG acquisition
7 18 August 2014
1-3-4
1-3-7 to 9
Correction: Description of Service Status Page
1-3-7 Correction: temperature → humidity in (48) and (49)
8 8 September 2014
1-3-4 Correction: Description of Service Status Page
1-6-1, 1-6-2 Correction: Procedure
9 6 November 2014
1-1-1 Change: Hagaki, Oufuku Hagaki
1-3-7 to 9 Added: Description of the counter value
A 23 February 2015
1-3-8 Change: 5 to 100(%)
Revision Date pages Revised contents

Utax P-4530DN Specifications

General

Brand	Utax
Model	P-4530DN
Category	Printer
Language	English